D2xB1LD2-H UL1971 Haz Loc Synchronized LED Light
The haz loc D2xB1LD2-H is an auto-synchronizing LED light/beacon tested to UL1971 suitable for public mode fire alarm, ADA compliant, hearing impaired applications. The unit is UL/cUL approved for Class I Div 2, Class II Div 2, Class I Zone 2/22 as well as IECEx and ATEX certified for Zone 2 and 22 hazardous area applications.
The D2x1BLD2-H utilises an array of high power Cree® LED's, orientated to optimise visibility in any direction. Multiple D2xB1LD2-H units will auto-synchronize when powered from the same power source removing the need for any additonal sync modules on the circuit. The D2xB1LD2-H contains a supervisory diode and duplicated pluggable terminals that not only simplify installation but also enable a 4 wire connection. UL1971 effective candela rating of 38.38cd.
Specification
| Source: | Array of 4 x High Power Cree® LED's |
| Modes: | 1Hz flash (60 fpm) 1.3Hz flash (80 fpm) 2Hz flash (120 fpm |
| Eff. Intensity cd: | 38.38 cd UL1971 Public mode fire |
| Eff. Intensity cd: | 180 cd UL1638 General signaling |
| Peak Intensity cd: | 300,000 cd |
| LED life: | >60,000 hours |
| Synchronization: | Flash rates synchronize for a minimum of 2 hours per UL1971 |
| Voltage: | 24V dc (16-33V dc) |
| In-rush: | 1.88A for 2ms |
| Ingress protection: | IP rating per EN60529:IP66 Type rating per UL50E/NEMA250:4/4X/3R/13 |
| Enclosure material: | Marine grade LM6 aluminum alloy |
| Enclosure colour: | Red (RAL3000) |
| Lens material: | Borosilicate glass |
| Cable entries: | 2 x M20x1.5, 2 x 1/2"NPT, 1 x 3/4"NPT |
| Stopping plugs: | Nickel Plated Brass plugs included |
| Ground/Earth stud: | M5 |
| Terminals: | 0.5 - 2.5mm² (20-14 AWG) |
| Line monitoring: | Blocking diode included EOL can be factory fitted |
| Operating temp: | -40 to +50°C [-40° to +122°F] |
| Storage temp: | -40 to +70°C [-40° to +158°F] |
| Relative humidity: | 90% at 20°C [68°F] |
| Weight: | 1.5kg/3.31Ibs |
Current Consumption
| Nominal Voltage: |
Voltage range: |
Flash Rate setting: |
Nominal operating current: |
|---|---|---|---|
24V dc |
Regulated 16-33V dc |
1Hz (60fpm) 1.3Hz (80 fpm) 2Hz (120fpm) |
99.5mA 104mA 103mA |
Part Codes
| Part Code: | Ident.: | Description: | |
|---|---|---|---|
| Product type: | D2xB1LD2 | LED Beacon | |
| Voltage: | DC024 | 24V dc (16-33Vdc) | |
| Cable entries: [e] | M | 2 x 1/2” NPT 2 x M20x1.5 1 x 3/4” NPT |
|
| Stopping plug material: [m] | N | Nickel plated brass | |
| Lens Guard: [s] | 0 | No lens Guard | |
| Version: [v] | H1 | UL, cUL, IECEx & ATEX - UL1971 | |
| Enclosure: [x] | R | Red RAL3000 | |
| Lens colour: [y] | C | Clear | |
| e.g: D2xB1LD2DC024MN0H1R/C | D2xB1LD2-H LED Beacon, 24Vdc nickel plated brass stopping plugs, UL, cUL, IECEx & ATEX approved - UL1971 Red enclosure with Clear lens |
||
| Also available as the D2xC2LD2-H combined alarm horn sounder and LED beacon | |||
| IS-MC1-R/A | IS-minialert Comb. - Rd/Am | STC Vietnam | E2S Vietnam |
| IS-MC1-R/B | IS-minialert Comb. - Red/Blue | STC Vietnam | E2S Vietnam |
| IS-MC1-R/C | IS-minialert Comb. - Red/Clear | STC Vietnam | E2S Vietnam |
| IS-MC1-R/G | IS-minialert Comb. - Red/Green | STC Vietnam | E2S Vietnam |
| IS-MC1-R/R | IS-minialert Comb. - Red/Red | STC Vietnam | E2S Vietnam |
| IS-DL105L-G/A | IS-DL105L Grey/Amber | STC Vietnam | E2S Vietnam |
| IS-DL105L-G/B | IS-DL105L Grey/Blue | STC Vietnam | E2S Vietnam |
| IS-DL105L-G/R | IS-DL105L Grey/Red | STC Vietnam | E2S Vietnam |
| IS-DL105L-R/A | IS-DL105L Red/Amber | STC Vietnam | E2S Vietnam |
| IS-DL105L-R/B | IS-DL105L Red/Blue | STC Vietnam | E2S Vietnam |
| IS-DL105L-R/R | IS-DL105L Red/Red | STC Vietnam | E2S Vietnam |
| IS-CP4A-BG-ST-[F][L][X] | IS-CP4A-BG Break Glass MCP | STC Vietnam | E2S Vietnam |
| IS-CP4B-BG-[T][F][L][X][E][S] | IS-CP4B-BG Break Glass MCP | STC Vietnam | E2S Vietnam |
Không có nhận xét nào:
Đăng nhận xét